Boral Roof Repair in Philadelphia: What to Know First
We provide independent Boral roof repair in Philadelphia, typically completing common jobs like shingle replacement, leak repair, and flashing work in a single visit. Most calls get a same-day or next-day appointment, and the price we quote is the price you pay. We’re not the cheapest crew in town, and we don’t aim to be - we’re the ones who come back if something isn’t right.
This page is for Philadelphia homeowners who already know they’ve got Boral roofing on their house and need it fixed properly. Maybe a neighbor’s contractor told you “we don’t work on that brand,” or you’ve noticed a leak after one of our hard spring storms and want someone who understands what Boral products do in this climate. Wherever you are in Philadelphia - from the row homes of Fishtown to the singles in Roxborough - we’re a phone call away at (855) 554-5116.
How Boral Products Fail - and How We Fix Them
- Boral Saxony 900 slate-look tiles - the interlocking edges on these can crack from thermal cycling after about 12-15 years in Philadelphia’s freeze-thaw winters. Water gets behind the tile, freezes, and pops the edge. We remove the damaged tiles, inspect the underlayment for saturation, and replace with matching Saxony 900 or a compatible aftermarket tile that locks the same way. The key is checking the nail flange - if it’s corroded from trapped moisture, we sister in new wood and start fresh.
- Boral Villa 900 concrete tiles - these are heavy, and Philadelphia’s occasional ice damming in January stresses the battens underneath. We see sagging courses, especially on north-facing pitches in neighborhoods like Mount Airy where tree shade keeps snow frozen longer. Our fix isn’t just replacing the cracked tile; we pull the course, inspect the batten spacing (should be 13 inches on center for Villa 900), and replace any water-softened wood before setting the new tile.
- Boral Smog-Eating Tile line - the photocatalytic coating that breaks down NOx also makes the surface slightly more porous after a decade of acid rain and Philadelphia’s summer humidity. Moss and lichen grip harder, and the freeze-thaw pops the surface granules. We soft-wash rather than pressure-wash, then seal with a compatible breathable sealer if the homeowner wants to preserve the smog-fighting property. Replacement tiles for this line have been spotty since Boral shifted distribution; we keep a small inventory and source through three independent suppliers.
- Boral flat concrete pavers on low-slope sections - common on the additions and garages in South Philly where someone wanted a uniform look with the main roof. The problem is the SBS modified underlayment underneath. It degrades from UV if any paver shifts, and Philadelphia’s summer heat accelerates the brittleness. We lift the pavers, replace the underlayment with a fresh peel-and-stick layer rated for 180°F, and relay the pavers with new pedestal clips. Takes longer than it looks, but it’s cheaper than a full tear-off.
- Boral ridge and hip caps - the accessory pieces are often a different concrete mix than the field tiles, and we’ve seen them fail 3-5 years sooner, especially on west-facing ridges that take the afternoon sun. In Philadelphia, that afternoon heat builds to 160°F on the ridge line. We replace with OEM caps when available, or fabricate matching caps from field tile on a wet saw. Either way, we re-bed with polymer-modified mortar, not standard Type S - it flexes with the thermal movement.
Our Boral Roof Repair Process
- 1
You call, a live person answers. No voicemail tree. We ask what you’re seeing, when it started, and whether you know the Boral product line. If you don’t know, we’ll figure it out on site.
- 2
Photo-documented inspection. Our technician climbs the roof in uniform, takes dated photos of the damage, the surrounding area, and any installation details that matter for Boral products - nail pattern, underlayment exposure, ventilation gaps. You see what we see.
- 3
Parts decision with you. If it’s a current Boral line, we quote OEM first. If the line is discontinued or backordered (Smog-Eating Tile, some Saxony colors), we explain the aftermarket option, show you the physical sample, and note any warranty implications. No surprises.
- 4
The repair, start to finish. Most Boral repairs take 2-4 hours. We protect your landscaping, work section by section, and never leave exposed underlayment overnight. For tile jobs, we save every intact removed piece - Boral tiles are reusable if the nail hole isn’t split.
- 5
Water test and walkthrough. We run a hose on the repair area, check the attic or ceiling below if accessible, and review the photos with you. The technician explains what was done and what to watch for.
- 6
Written 90-Day Done Right Promise. If it’s not right, we come back. No paperwork to file, no arguing. The guarantee is on our letterhead and in your hand before we leave.
What Boral Roof Repair Costs in Philadelphia
Boral roof repair in Philadelphia runs higher than standard asphalt shingle work because of the tile weight, specialty fasteners, and the skill required. Here’s what we typically see:
| Repair Type | Typical Range | What Moves the Price |
|---|---|---|
| Single tile replacement (Saxony/Villa 900) | $180 - $340 | Height of roof, batten condition, tile availability |
| Leak repair, flashing around chimney or vent | $320 - $580 | Concrete cutting, mortar re-bed, underlayment extent |
| Valley repair (open valley with Boral wye) | $450 - $780 | Length of valley, ice barrier replacement |
| Flat roof section (pavers + underlayment) | $680 - $1,200 | Area size, pedestal count, structural decking check |
| Ridge/hip cap replacement (per linear foot) | $24 - $38/ft | Access difficulty, mortar type, cap availability |
These are real Philadelphia numbers for 2024-2025, not teaser rates. The estimate we give is the invoice you get. Call (855) 554-5116 for an exact quote - estimates are free, and we don’t charge to show up.
Why Philadelphia Homeowners Call Ridgeline Roofing Co. of Philadelphia for Boral Work
We’ve been on Philadelphia roofs since 2016. Ned Calloway started this company after learning the trade at Williamson College of the Trades and spending twenty years climbing everything from flat rubber in South Philly to steep slate in Chestnut Hill. A roof doesn’t lie - and neither do I.
We know Boral products because we’ve repaired them through Philadelphia’s hottest summers and iciest winters, not because we read a brochure. Our technicians are background-checked, uniformed, and trained to document every inspection with photos from your actual roof. If we say a tile needs replacing, you’ll see the crack.
We’re also authorized installers for GAF, Owens Corning, and CertainTeed, so if your Boral repair reveals a larger issue, we can discuss options across brands without pushing you toward any one manufacturer. The 90-Day Done Right Promise covers every job: if it’s not right, we make it right. No paperwork, no runaround.
And when you call (855) 554-5116, a live person answers - 24 hours a day, including the middle of a February ice storm when that leak starts dripping into your bedroom.
FAQs
No, if the repair is done with Boral-approved materials and methods. As an independent Boral service provider, we use OEM parts when available and document the work with photos. If your roof is still under the original Boral warranty, we note the repair details so any future claim isn’t denied for undocumented work. Call (855) 554-5116 and we’ll check your warranty status before we start.
Current Boral lines like Saxony 900 and Villa 900 typically arrive in 3-5 business days from regional distributors in Baltimore or central Pennsylvania. Discontinued lines like Smog-Eating Tile can take 2-3 weeks or require aftermarket sourcing. We keep a small inventory of common Boral tiles and maintain relationships with three independent suppliers to avoid delays. For urgent leaks, we can often install a temporary weather-tight patch same day.
Repair is almost always cheaper if the damage is localized and the underlayment is sound. We recommend replacement when more than 25-30% of the tiles are cracked, the battens are rotted throughout, or the underlayment has reached the end of its life. A full Boral tile roof replacement in Philadelphia runs $18-$28 per square foot, so a $400 repair versus a $24,000 replacement is an easy math problem if the roof has life left. We’ll tell you straight which side of that line you’re on.
Usually yes, but not always perfectly. Concrete tiles weather and fade over 10-15 years of Philadelphia sun and acid rain. New OEM tiles will be close but slightly brighter. We always bring a physical sample to compare in natural light before ordering. For highly weathered roofs, we sometimes recommend replacing a slightly larger area so the color difference blends across the slope rather than showing one bright patch.
Yes. We’re authorized installers for GAF, Owens Corning, CertainTeed, IKO, Atlas, and Tamko. Many Philadelphia homes have mixed systems - Boral tile on the main roof with asphalt shingles on an addition, for instance. We repair and replace across all seven lines, so you don’t need two contractors. Same crew, same guarantee, same phone number: (855) 554-5116.
Written by Ned Calloway, Owner, Ridgeline Roofing Co. of Philadelphia at Ridgeline Roofing Co. of Philadelphia, serving Philadelphia and nearby areas.